Reliable LiFePO4
Power for Every Job
Shop deep-cycle batteries for golf carts, RVs, marine use, solar storage, backup power, and demanding work environments.
Works Great, easy to set up and last ste all day
didn not realize how annoying my old setup was until I switched to this. Having the battery, dish, and all the accessories in one dedicated case just makes life easier.
The 288Wh battery is a big step up from the smaller packs I have used. I can get a solid few hours without stressing about power, which is perfect for quick work sessions or staying connected on the road.
What I like most is how straightforward it is. Open the case, plug in the Starlink Mini, hit the power button, and you are online in a few minutes. No extra setup or guesswork.
Also worth mentioning the case design is actually useful. Everything has its place, so youq are not dealing with tangled cables or loose gear.
Not the cheapest option out there, but if you want a tidy, reliable, grab-and-go setup for Starlink Mini, this does the job really well.
It is a 288Wh 90000mAh LiFePO4 Bbattery pack power station. On the packaging, I see it is made in China and lists the core specs: a 288Wh LiFePO4 battery and an input of 12 to 30 volts at 5 amps max 60 watts. Inside the packaging, I found the power station, a 70 inch long DC to DC cable, a 15 3/4 inch long DC to USB-C cable, and a user manual. Everything is housed in a black carrying case with a handle and a double zipper. The storage case is weather resistant, and the zippers are designed to block moisture. The interior has straps to hold the components in place, dedicated space for accessories, and a mesh pocket for smaller items. The power station doubles as a stand for the Starlink Mini. The Starlink mounts onto the battery pack using the pole mount and locks in securely. The unit is stable and sturdy. The unit has IP waterproofing. The battery is LiFePO4. The port selection includes a DC output port at 3.1 amps max 60 watts, a USB-A port at 5 volts 3 amps, and a USB-C port. It includes a 5 amp PD 100 watt USB-C output for charging laptops and other high-draw devices. The ports are protected from rain by a rubber cover. It supports MPPT for solar panel charging, or I can plug it into my vehicle's 12 volt port to charge on the go. There is a power button next to a 4-LED battery status indicator. I press the button once to turn it on and once again to turn it off. I can activate a trickle mode by long pressing the button. When running the Starlink Mini on a standby or low-draw plan averaging around 20 watts, the battery lasts up to 14 hours. I can also plug in other devices, like my laptop, to charge them simultaneously, though doing so draws from the total battery life. If I charge it with one input, it takes about 5 hours to reach a full charge. If I use both inputs simultaneously, it charges in 2.5 hours. On the bottom of the power station, I see it is labeled as rainproof and has CE and FCC certifications. It lists all the possible input and output ranges for charging. I find this power station a practical kit for off-grid internet capability, as a power bank compatible to charge mobile devices, and as a mount for my Starlink Mini. I find it valuable.
I use this battery for my market stall. Sometimes when I set up my stall, I need electricity for lights and to charge my phone. I think it is very good !!it is not heavy and very easy to carry. I highly recommend it.